Csatornatisztító teherautó renault mts dino 3 6x4 gázolaj használt
Csatornatisztító teherautó Renault MTS DINO 3 6x4 Gázolaj használt
- 183 600 Km
- 2008.01.01
- Renault
- 26-021 Niwy
útfenntartó-és-karbantartógép Csatornatisztító teherautó
|
Legfontosabb információk
|
|
|---|---|
| Honlap hiv. száma: | 9517243 |
| Karosszéria | Csatornatisztító teherautó |
| Márka | Renault |
| Modell | MTS DINO 3 |
| Állapot | Használt |
| Az első nyilvántartásba vétel időpontja | 2008.01.01 |
| Ország | LENGYELORSZÁG |
| Gyártó | Renault |
Gép állapota |
|
|---|---|
| Energia | Gázolaj |
Sebességváltó és erőátvitel |
|
|---|---|
| A sebességváltó adatai | Boîte automatique |
| Sebességváltó | Kézi sebességváltó |
Tulajdonságok Renault MTS DINO 3 |
|
|---|---|
| Megtett kilométerek száma | 183 600 km |
Gumiabroncsok |
|
|---|---|
| A gumiabroncsok állapota és mérete | - |
Felfüggesztés / Tengelyek |
|
|---|---|
| Tengelyek | 6x4 |
Megjegyzések |
|---|
|
Localisation :
• Poland Niwy1046 km to "Italy/Milan" Condition : • used More details : • deep blue RENAULT MTS DINO 3 vacuum cleaner excavator sucking loose substances Year of production of the body 2008 Year of manufacture of the car 2007 Mileage 183600 km MTS DINO 3 SB 202 with two fans is the most effective suction excavator. It is intended for use in specialist civil engineering, performing the heaviest open pit works and specialized works in industry. This model is up to any task, as it is equipped with maximum suction power and the largest possible tank volume of 8 m³. The weight distribution of the superstructure is symmetrical, because the suction hose boom is in the central position, which allows the same range of work on both sides. Air draft: 36,000 m³/h Negative pressure generated: 34,000 Pa The blower is made of two groups of centrifugal fans with a working capacity of 220kW Tank container 8 m³ Hydraulic boom with 7 m suction hose, 170 degree rotation and 250 mm diameter Rotary compressor with a capacity of 4.5 m3/h, working pressure of 8 bar Radio control Ability to suck material from a depth of 20 m and a distance of 100 m. 100L water tank It is used for industrial cleaning, using a suction excavator it is possible to remove large amounts of materials deposited in silos, tanks and halls. It is applicable in the following areas: cleaning tanks and silos from accumulated medium, cleaning tanks, settling tanks from sludge and sediments, cleaning of filtration chambers, pumping stations, from accumulated sludge cleaning open and closed surfaces, e.g. channels, boilers, silos, industrial equipment and machinery of filtration chambers and separators The device can be used for sewerage repairs without the risk of damaging underground installations. A traditional excavator can damage them. Sometimes it is necessary to remove the soil manually with shovels. Meanwhile, the excavator sucks the soil from between the pipes and cables, pulling in even large stones without damaging any installations. Below are more examples of suction excavator applications: - removal, replacement of filter beds, gravel, sand, activated carbon, catalytic beds, etc. - disposal of spent chemical catalysts - removal of accumulated medium from tanks and silos - cleaning tanks, settling tanks from sludge and sediments - cleaning of filtration chambers, pumping stations, from accumulated sludge - cleaning of open and closed surfaces, e.g. channels, silo boilers, industrial equipment. - removal of railway crushed stone - excavations in hard-to-reach places - excavations in places where we have a problem with high density of all installations and the fear of their damage Suction excavators are able to significantly reduce the time required for removal all kinds of materials, located in places where it is not possible the use of other mechanical devices. For the search engine replacement of filter beds, industrial cleaning, industrial vacuuming, soil suction, coal replacement, bed mining, filter emptying, crushed stone removal, stone dusting, pen replacement, gravel replacement, material suction, sludge removal, tank cleaning, filter cleaning, material removal, removal deposits, removal of coals, CAR IN EXCELLENT TECHNICAL CONDITION! IT IS VISUALLY STUNNING! IN PERFECT CONDITION! 100% ACCIDENT-FREE! POSSIBILITY OF CREDIT OR LEASING - we arrange credit and leasing formalities - simplified procedures 0% of the first payment - and newly opened companies -as well as customers entered in KRD and BIG MORE INFORMATION AT NO. show contacts (ENG.RUS.POL) WhatsApp and Viber ATTENTION. This announcement is only commercial information and does not constitute an offer pursuant to art. 66 § 1 of the Civil Code. The seller is not responsible for any errors or outdated advertisements |
|
Mindent megtekint
|
Megjegyzések |
|---|
|
Localisation : • Poland Niwy1046 km to "Italy/Milan" Condition : • used More details : • deep blue RENAULT MTS DINO 3 vacuum cleaner excavator sucking loose substances Year of production of the body 2008 Year of manufacture of the car 2007 Mileage 183600 km MTS DINO 3 SB 202 with two fans is the most effective suction excavator. It is intended for use in specialist civil engineering, performing the heaviest open pit works and specialized works in industry. This model is up to any task, as it is equipped with maximum suction power and the largest possible tank volume of 8 m³. The weight distribution of the superstructure is symmetrical, because the suction hose boom is in the central position, which allows the same range of work on both sides. Air draft: 36,000 m³/h Negative pressure generated: 34,000 Pa The blower is made of two groups of centrifugal fans with a working capacity of 220kW Tank container 8 m³ Hydraulic boom with 7 m suction hose, 170 degree rotation and 250 mm diameter Rotary compressor with a capacity of 4.5 m3/h, working pressure of 8 bar Radio control Ability to suck material from a depth of 20 m and a distance of 100 m. 100L water tank It is used for industrial cleaning, using a suction excavator it is possible to remove large amounts of materials deposited in silos, tanks and halls. It is applicable in the following areas: cleaning tanks and silos from accumulated medium, cleaning tanks, settling tanks from sludge and sediments, cleaning of filtration chambers, pumping stations, from accumulated sludge cleaning open and closed surfaces, e.g. channels, boilers, silos, industrial equipment and machinery of filtration chambers and separators The device can be used for sewerage repairs without the risk of damaging underground installations. A traditional excavator can damage them. Sometimes it is necessary to remove the soil manually with shovels. Meanwhile, the excavator sucks the soil from between the pipes and cables, pulling in even large stones without damaging any installations. Below are more examples of suction excavator applications: - removal, replacement of filter beds, gravel, sand, activated carbon, catalytic beds, etc. - disposal of spent chemical catalysts - removal of accumulated medium from tanks and silos - cleaning tanks, settling tanks from sludge and sediments - cleaning of filtration chambers, pumping stations, from accumulated sludge - cleaning of open and closed surfaces, e.g. channels, silo boilers, industrial equipment. - removal of railway crushed stone - excavations in hard-to-reach places - excavations in places where we have a problem with high density of all installations and the fear of their damage Suction excavators are able to significantly reduce the time required for removal all kinds of materials, located in places where it is not possible the use of other mechanical devices. For the search engine replacement of filter beds, industrial cleaning, industrial vacuuming, soil suction, coal replacement, bed mining, filter emptying, crushed stone removal, stone dusting, pen replacement, gravel replacement, material suction, sludge removal, tank cleaning, filter cleaning, material removal, removal deposits, removal of coals, CAR IN EXCELLENT TECHNICAL CONDITION! IT IS VISUALLY STUNNING! IN PERFECT CONDITION! 100% ACCIDENT-FREE! POSSIBILITY OF CREDIT OR LEASING - we arrange credit and leasing formalities - simplified procedures 0% of the first payment - and newly opened companies -as well as customers entered in KRD and BIG MORE INFORMATION AT NO. show contacts (ENG.RUS.POL) WhatsApp and Viber ATTENTION. This announcement is only commercial information and does not constitute an offer pursuant to art. 66 § 1 of the Civil Code. The seller is not responsible for any errors or outdated advertisements |
Eladási ár
útfenntartó-és-karbantartógép Csatornatisztító teherautó
|
Legfontosabb információk
|
|
|---|---|
| Honlap hiv. száma: | 9517243 |
| Karosszéria | Csatornatisztító teherautó |
| Márka | Renault |
| Modell | MTS DINO 3 |
| Állapot | Használt |
| Az első nyilvántartásba vétel időpontja | 2008.01.01 |
| Ország | LENGYELORSZÁG |
| Gyártó | Renault |
Gép állapota |
|
|---|---|
| Energia | Gázolaj |
Sebességváltó és erőátvitel |
|
|---|---|
| A sebességváltó adatai | Boîte automatique |
| Sebességváltó | Kézi sebességváltó |
Tulajdonságok Renault MTS DINO 3 |
|
|---|---|
| Megtett kilométerek száma | 183 600 km |
Gumiabroncsok |
|
|---|---|
| A gumiabroncsok állapota és mérete | - |
Felfüggesztés / Tengelyek |
|
|---|---|
| Tengelyek | 6x4 |
Megjegyzések |
|---|
|
Localisation :
• Poland Niwy1046 km to "Italy/Milan" Condition : • used More details : • deep blue RENAULT MTS DINO 3 vacuum cleaner excavator sucking loose substances Year of production of the body 2008 Year of manufacture of the car 2007 Mileage 183600 km MTS DINO 3 SB 202 with two fans is the most effective suction excavator. It is intended for use in specialist civil engineering, performing the heaviest open pit works and specialized works in industry. This model is up to any task, as it is equipped with maximum suction power and the largest possible tank volume of 8 m³. The weight distribution of the superstructure is symmetrical, because the suction hose boom is in the central position, which allows the same range of work on both sides. Air draft: 36,000 m³/h Negative pressure generated: 34,000 Pa The blower is made of two groups of centrifugal fans with a working capacity of 220kW Tank container 8 m³ Hydraulic boom with 7 m suction hose, 170 degree rotation and 250 mm diameter Rotary compressor with a capacity of 4.5 m3/h, working pressure of 8 bar Radio control Ability to suck material from a depth of 20 m and a distance of 100 m. 100L water tank It is used for industrial cleaning, using a suction excavator it is possible to remove large amounts of materials deposited in silos, tanks and halls. It is applicable in the following areas: cleaning tanks and silos from accumulated medium, cleaning tanks, settling tanks from sludge and sediments, cleaning of filtration chambers, pumping stations, from accumulated sludge cleaning open and closed surfaces, e.g. channels, boilers, silos, industrial equipment and machinery of filtration chambers and separators The device can be used for sewerage repairs without the risk of damaging underground installations. A traditional excavator can damage them. Sometimes it is necessary to remove the soil manually with shovels. Meanwhile, the excavator sucks the soil from between the pipes and cables, pulling in even large stones without damaging any installations. Below are more examples of suction excavator applications: - removal, replacement of filter beds, gravel, sand, activated carbon, catalytic beds, etc. - disposal of spent chemical catalysts - removal of accumulated medium from tanks and silos - cleaning tanks, settling tanks from sludge and sediments - cleaning of filtration chambers, pumping stations, from accumulated sludge - cleaning of open and closed surfaces, e.g. channels, silo boilers, industrial equipment. - removal of railway crushed stone - excavations in hard-to-reach places - excavations in places where we have a problem with high density of all installations and the fear of their damage Suction excavators are able to significantly reduce the time required for removal all kinds of materials, located in places where it is not possible the use of other mechanical devices. For the search engine replacement of filter beds, industrial cleaning, industrial vacuuming, soil suction, coal replacement, bed mining, filter emptying, crushed stone removal, stone dusting, pen replacement, gravel replacement, material suction, sludge removal, tank cleaning, filter cleaning, material removal, removal deposits, removal of coals, CAR IN EXCELLENT TECHNICAL CONDITION! IT IS VISUALLY STUNNING! IN PERFECT CONDITION! 100% ACCIDENT-FREE! POSSIBILITY OF CREDIT OR LEASING - we arrange credit and leasing formalities - simplified procedures 0% of the first payment - and newly opened companies -as well as customers entered in KRD and BIG MORE INFORMATION AT NO. show contacts (ENG.RUS.POL) WhatsApp and Viber ATTENTION. This announcement is only commercial information and does not constitute an offer pursuant to art. 66 § 1 of the Civil Code. The seller is not responsible for any errors or outdated advertisements |
|
Mindent megtekint
|
Megjegyzések |
|---|
|
Localisation : • Poland Niwy1046 km to "Italy/Milan" Condition : • used More details : • deep blue RENAULT MTS DINO 3 vacuum cleaner excavator sucking loose substances Year of production of the body 2008 Year of manufacture of the car 2007 Mileage 183600 km MTS DINO 3 SB 202 with two fans is the most effective suction excavator. It is intended for use in specialist civil engineering, performing the heaviest open pit works and specialized works in industry. This model is up to any task, as it is equipped with maximum suction power and the largest possible tank volume of 8 m³. The weight distribution of the superstructure is symmetrical, because the suction hose boom is in the central position, which allows the same range of work on both sides. Air draft: 36,000 m³/h Negative pressure generated: 34,000 Pa The blower is made of two groups of centrifugal fans with a working capacity of 220kW Tank container 8 m³ Hydraulic boom with 7 m suction hose, 170 degree rotation and 250 mm diameter Rotary compressor with a capacity of 4.5 m3/h, working pressure of 8 bar Radio control Ability to suck material from a depth of 20 m and a distance of 100 m. 100L water tank It is used for industrial cleaning, using a suction excavator it is possible to remove large amounts of materials deposited in silos, tanks and halls. It is applicable in the following areas: cleaning tanks and silos from accumulated medium, cleaning tanks, settling tanks from sludge and sediments, cleaning of filtration chambers, pumping stations, from accumulated sludge cleaning open and closed surfaces, e.g. channels, boilers, silos, industrial equipment and machinery of filtration chambers and separators The device can be used for sewerage repairs without the risk of damaging underground installations. A traditional excavator can damage them. Sometimes it is necessary to remove the soil manually with shovels. Meanwhile, the excavator sucks the soil from between the pipes and cables, pulling in even large stones without damaging any installations. Below are more examples of suction excavator applications: - removal, replacement of filter beds, gravel, sand, activated carbon, catalytic beds, etc. - disposal of spent chemical catalysts - removal of accumulated medium from tanks and silos - cleaning tanks, settling tanks from sludge and sediments - cleaning of filtration chambers, pumping stations, from accumulated sludge - cleaning of open and closed surfaces, e.g. channels, silo boilers, industrial equipment. - removal of railway crushed stone - excavations in hard-to-reach places - excavations in places where we have a problem with high density of all installations and the fear of their damage Suction excavators are able to significantly reduce the time required for removal all kinds of materials, located in places where it is not possible the use of other mechanical devices. For the search engine replacement of filter beds, industrial cleaning, industrial vacuuming, soil suction, coal replacement, bed mining, filter emptying, crushed stone removal, stone dusting, pen replacement, gravel replacement, material suction, sludge removal, tank cleaning, filter cleaning, material removal, removal deposits, removal of coals, CAR IN EXCELLENT TECHNICAL CONDITION! IT IS VISUALLY STUNNING! IN PERFECT CONDITION! 100% ACCIDENT-FREE! POSSIBILITY OF CREDIT OR LEASING - we arrange credit and leasing formalities - simplified procedures 0% of the first payment - and newly opened companies -as well as customers entered in KRD and BIG MORE INFORMATION AT NO. show contacts (ENG.RUS.POL) WhatsApp and Viber ATTENTION. This announcement is only commercial information and does not constitute an offer pursuant to art. 66 § 1 of the Civil Code. The seller is not responsible for any errors or outdated advertisements |
Eladási ár
15 éve a Europa-Teherauto.com oldalon
Úr FURMANEK Wiktor
Anglais
+48.697.07.06.70
Kapcsolatfelvétel a jármű eladójával
Wiktor Furmanek
- Lengyel
- Angol
-
+1 Orosz
Az Ön elérhetőségei
Fiók létrehozása /
Bejelentkezés
Az Ön elérhetőségei
Módosítás
Telefon
E-mail cím
Helymeghatározás
Vállalat
Mutasson többet
Kevesebb mutatása
Kapcsolatfelvétel a jármű eladójával Módosítás
-
Telefon
-
E-mail cím
-
Helymeghatározás
-
Vállalat
Mutasson többet
Kevesebb mutatása
Biztonsági tanácsok
Hasonló hirdetések
41
MAN csatornatisztító teherautó LE HYDROVIDE
TRUCK POLAND
1
Mercedes csatornatisztító teherautó
P.HU. EFEKT Gabriela Stokłosa
5
Mercedes csatornatisztító teherautó Actros 2532
GP TRUCK TRADING
24
Scania csatornatisztító teherautó P 420
AUTO-SEBA
30
MAN csatornatisztító teherautó TGM 15.250
Ciezarowki.pl
Eladó 10 éve
Les autres sites du groupes :
Europa-Teherauto.com :
Használt teherautó vétele és eladása
Europa-Munkagepek.com :
Achat vente de matériel TP d'occasion
Europa-Haszonjarmu.com :
Használt haszonjármű vétele és eladása
Europa-Anyagmozgatogepek.com :
Használt emelőtargoncák adása, vétele
Europa-Mezogazdasagigepek.com :
Használt mezőgazdasági eszközök vétele és eladása